Load Cells » 1100 Double-Ended Beam Load Cell
|
|
 |
HIGHLIGHTS
- Double ended shear beam load cell
- Strain gauges measure shear force
- Center loaded
- Designed for rigid mount and rugged applications
- Two year warranty
|
|
1100 DOUBLE ENDED SHEAR BEAM LOAD CELL
This load cell is designed for rigid mount and very rugged applications. This makes it an ideal sensor for onboard weighing and any other situation where dynamic loads may be applied.
SPECIFICATIONS
| Capacities |
25,000 lb and 50,000 lb load cell capacities |
| Safe Overload |
150% full scale safe overload |
| Ultimate Overload |
300% full scale ultimate overload |
| Full Scale Ouput |
2 +/- 0.25% mv/v |
| Maximum Excitation |
15 volts DC |
| Operating Temp |
-50°C to +80°C |
| Compensated Temp |
-10°C to +40°C |
| Thermal Zero Shift |
0.00155 full scale / degree F |
| Sealing Standard |
IP-67 protected against high pressure jets of water |
| Non Linearity |
+/- 0.03% full scale |
| Material |
Nickel plated high strength alloy steel |
| Bridge Resistance |
700 Ohm |
|
 |
ML-1100-25K
The main feature of this load cell are that the bolt holes are located at the bottom of the load cell which allows it to be mounted from a base beneath the load cell. Because of the design, it is the standard load cell for Massload axle pads.
|
 |
ML-1100-25K-WIM
The main feature of this load cell are that the bolt holes are located at the top of the load cell which allows it to be mounted from above. Because of the design, it is the standard load cell for our permanent Weight In Motion Pads.
|
 |
ML-1100-50K
This is a higher capacity load cell (50,000 lb). It is typically used in Massload axle pads when extra shock loading is present.
|
 |
ML-1100-25K-SL
This is as small shell version of the ML-1100-25k which is used in applications that require smaller load cells.
|
|
|
|
|
|
|
|
